Orion System GPC-XP Controller - Manual (Page 54)

Index
GPC-XP Controller Technical Guide 54
A-B
0 - 5vdc User Scaled..............13
4 - 20mA User Scaled..............13
24 Hour Operation..............37
A
Above/Below Options..............22
Address
Communicating Sensor..............13
ADDRESS Dipswitches..............7
Addressing..............8
Address Switch Setting..............7
ALARM Button..............39
Alarm Confi guration..............19
Analog Inputs..............16
Binary Inputs..............19
Alarm Delay Period Hours..............27
Alarm Delay Period Minutes..............27
Alarming Enabled..............19
Alarm Notifi cation..............39
Alarms
Analog Inputs..............39
Binary Inputs..............39
Confi guring..............39
Enabling Alarms..............39
Internal Schedule..............19
Notifi cation..............39
Relay Status..............39
Alarms Window..............39
Alternate Override..............33
Voltage..............33
Analog Broadcast Channel Box..............15
Analog Inputs..............12
Alarm Confi guration..............16
Alarm Notifi cation..............39
Calibrate Sensor..............16
Clear Sensor Override..............16
Confi guration Window..............13
Data Entry Dialog Box..............12
Internal Schedule..............14
Number of Readings to Average..............15
Override Duration..............14
Override Reading..............16
Renaming..............12
Send Global Analog..............15
Sensor Reading Appendix..............14
Sensor Scaling..............14
User Scaling..............15
Wall Sensor..............16
Analog Inputs Window..............12
Navigation..............12
Analog Output
Cancel Override..............33
Override..............33
Analog Output Confi guration Window..............29
Analog Outputs
Alternate Override..............33
Confi guring..............29
Controlling Schedule..............32
Control Setpoints..............31
Control Source..............31
Control Type Field..............29
Derivative Constant..............30
Enabling Binary Input..............32
Enabling Relay..............32
Floating Point Control..............30
Integral Constant..............30
Logic, Setpoint, and Deadband..............33
Naming..............28
Outdoor Air Enable Setpoints..............32
Output Voltage Limits..............32
PID Control..............30
PID Derivative Filter..............30
Renaming..............28
Reset Limits..............31
Analog Outputs Window..............28
Components..............28
Navigation..............28
Averaging Readings..............15
B
Baud Rate..............8
Binary Broadcast Channel Box..............19
Binary Input Confi guration Window..............18
Binary Inputs..............17
Alarm Confi guration..............19
Alarm Notifi cation..............39
Confi guring..............18
Internal Schedule Used for Alarms..............19
Naming..............17
Navigation..............17
Override Binary..............19
Renaming..............17
Send Global Binary..............19
Binary Input to Follow..............24
,
25
Binary Input Window..............17
Binary Override..............19
Broadcast Channels..............42