Orion System GPC-XP Controller - Manual (Page 56)

Index
GPC-XP Controller Technical Guide 56
G
GBD Average Reading..............31
,
33
GBD Inputs..............34
GBD Lowest Reading..............31
GBD Peak Reading..............31
,
33
GBD Status..............34
Global Analog
Send to ALL Loops..............15
Send to Local Loop..............15
Global Analog Help Screen..............48
Global Binary
Help Screen..............48
Send to Local Loop..............19
Global Binary
Send to ALL Loops..............19
Global Binary Help Screen..............48
GPC-XP Controller
Address..............8
Address Switch Settings..............7
Environmental Requirements..............5
Mounting..............5
Navigation..............11
Overview..............3
Power Supply..............5
Wiring Diagram..............6
GPC-XP Controllers
Accessing..............10
Renaming..............10
GPC-XP Controller Status Screen..............11
GPC-XP Controller Status Screen Toolbar..............11
H
Hardware Requirements..............9
Help Screen
Formula..............49
Global Analog..............48
High Limit Setpoint
Control Source..............24
Holidays..............38
Holiday Schedule Window..............38
Humidity Sensor
Communicating..............13
I
Increasing Proof Setpoint..............24
Initialization..............9
Installation & Wiring..............6
Integral Constant..............30
Internal Schedule..............14
Internal Schedule Used for Alarms..............19
L
Lag Relay for Lead/Lag Control..............23
Lead/Lag Control..............27
Lead Relay for Lead/Lag Control..............23
LEDs..............9
License..............9
Load Log..............45
Logging..............45
Logging Interval..............42
Logging Menu..............45
Logical AND Control Method..............26
Logical OR Control Method..............26
Logic, Setpoint, and Deadband..............33
Log Selection..............45
Low Limit Setpoint
Control Source..............24
M
Main Control Method..............22
Main Control Method Window..............22
Maximum Slide Offset Effect..............16
Minimum Off Time..............27
Minimum Run Time..............27
Mounting..............5
N
N/C Contact (Open for Active)..............18
Network Operation..............7
Night Setback Setpoint Spread..............24
No Alarms Button..............39
N/O Contact (Close for Active)..............18
Number of Readings to Average..............15
G-N