What’s included, What’s included? -2 – Quintum Technologies Tenor Call Relay SP User Manual
Page 7
Preface-2
P/N 480-0048-00-10
About this Guide
What’s included?
This product guide is divided into chapters; each chapter describes a specific topic. The following chapters are
included:
• About this Guide: Describes what is included in the product guide, including typographical conventions.
• Chapter 1: Overview: Includes a general overview of the product, including features and how the Call
Relay SP product fits into your network.
• Chapter 2: Hardware Components: Hardware description.
• Chapter 3: Installation. Describes how to install the Call Relay SP unit, including how to set the IP
address.
• Chapter 4: Configuring Call Relay SP. Includes information for accessing the Command Line Interface
(CLI).
• Chapter 5: System Alarms. Describes how to use the Alarm Manager and tells you how to view alarms
via telnet session.
• Chapter 6: Working with SNMP. This chapter describes the SNMP protocol and how to use it with the
Call Relay SP unit.
• Chapter 7: Call Detail Recording. Describes the CDR feature, including how to display and read CDRs.
• Chapter 8: Diagnostic/Maintenance. Describes how to troubleshoot and monitor the health of the sys-
tem.
• Appendix A: Specifications/Approvals. List of Call Relay SP’s specifications and approvals.