General maintenance, Replace system fan, Reset system – Quintum Technologies Tenor Call Relay SP User Manual
Page 85: Change password, General maintenance -7, Replace system fan -7, Reset system -7, Change password -7
P/N 480-0048-00-10
8-7
Chapter 8: Diagnostics/Maintenance
General Maintenance
Replace System Fan
If one of the system fans is not working, it must be replaced. To replace a fan, contact Quintum.
Reset System
Reset the system as follows: For AC, turn the power switch off and then back on. For DC, turn the circuit
breaker to OFF and then back to ON.
Change Password
For security purposes, you may want to change your password. You can change the password via Command
Line Interface (CLI) as follows:
1. Access the CLI through a Telnet session. See Chapter 4: Getting Started with Command Line Interface
(CLI) for more information.
2. Access the Maintain module.
3. Type password. A prompt will ask you for the old password.
4. Type the old password and press Enter. A prompt will ask you for the new password. Type the new pass-
word and press Enter. A confirmation will ask you to confirm the new password.
5. Re-type the new password and press Enter.
A message will tell you the password was changed successfully.