Teac 2488 - Manual (Page 18)

1 – Setting up and introduction
18
TASCAM 2488 User’s Guide
7 Adjust the tone of the guitar, by
pressing the
SELECT key of channel
1, and then pressing the EQ key.
8 Use the cursor keys and the wheel to
move around the display and change
values. The settings are shown as
numbers and as a graph.
Use the on-screen SW on the left side
of the display (or press and hold
SHIFT and press EQ ) to compare the
sound with and without the equaliza-
tion.
9 Press and hold down the RECORD
key and press the PLAY key. The
PLAY and RECORD indicators above
the transport keys both light, and the
REC key of track 1 lights solidly.
10 The metronome you set up earlier
starts to play, and you can play your
rhythm part along with it, recording
as you go.
Press the STOP key when you are
finished.
11 To return to the zero position, where
your song began, press and hold the
STOP key, and press the REW key
(marked as RTZ —“return to zero”).
12 When you’ve finished recording,
press channel 1’s
REC key to safe the
track.