Teac 2488 - Manual (Page 26)

2 – Mixer
26
TASCAM 2488 User’s Guide
EQ
Like the ordinary channels, the stereo bus has three-
band equalization, with sweepable center frequen-
cies, and variable Q for the midrange.
To access this,
1 Press the STEREO key.
2 Press the EQ key:
3 Use the cursor keys and wheel to select and
adjust the EQ parameters for the stereo bus.
Dynamics
The stereo bus has a stereo dynamics processor
(compressor or expander) available.
1 Press and hold the SHIFT key.
2 Press the STEREO key.
3 Use the cursor keys and wheel to select and
adjust the parameters for the effect. Note that
the last parameter is an on/off switch. When
set to
OFF , the dynamics processor is bypassed.
Dynamics library From the screen above, press-
ing ENTER brings up the stereo dynamics library
screen.
Use the left and right keys to select the PRESET or
USER libraries, or to SAVE the current setting.
Use the wheel to select library entries and press
ENTER to load the entry.
If you save a setting, you can add a title to the current
stereo dynamics settings and press
ENTER to save it
as a user library effect.