Teac 2488 - Manual (Page 35)

3 – Effects
TASCAM 2488 User’s Guide
35
Tuner
This is not really an effect, but uses one of the keys.
Press the shifted MULTI key to bring up the TUNER
screen.
The tuner is used with the signal from input H on the
front panel (reserved for guitars and basses). It can-
not be used with any other input.
When a note is played, the 2488 tuner displays the
note closest to that note, and the bars under the name
show whether the actual note is more sharp (the bars
to the right of the center are highlighted) or flat (the
bars to the left of the center are highlighted) than the
true value.
When the larger center bar alone is highlighted, the
instrument is tuned to the displayed note.
You can set the reference A to a value other than
440Hz if necessary.
Exit the tuner by pressing the shifted MULTI key
again.