Configuration sequence, Configuration sequence -7, Figure 2-7 – Verilink M1-3 (880-503136-001) Product Manual User Manual
Page 25
Advertising
Quick Set-Up
Verilink M1-3 User Manual
2-7
Figure 2-7 Example Configuration
Configuration
Sequence
The circuit options are configured in the following order if the M1-
3 is the source port:
•
Name
•
Mode
•
SP (source port)
•
DP (destination port)
•
ST (source T1, see Note)
•
SM (source mapping)
•
DM (destination mapping).
NOTE: Circuit port options vary depending on the module, however
this sequence is the general order of mapping for the M1-3.
The menu option ST (Source T1) displays if the M1-3 is the
source port. DT (destination T1) displays if the M1-3 is the
destination port.
Advertising