Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 35)

M1-3 Configuration Options
Verilink M1-3 User Manual 3-5
T1 Port
Configuration
Menu
To set T1 port configuration from the M1-3 Configuration Menu,
type “T” and select the DS3 timeslot number (1-28). Up to 28 T1s
can be multiplexed onto the DS3 port. Each T1 can have a unique
configuration. Each T1 port is connected via a circuit to another
AS3000 application module’s port.
Figure 3-4 shows a sample menu for the first T1 in the DS3 circuit,
shown as Port 1. Table 3-3 defines the M1-3 Port Configuration
Menu options.
Figure 3-4 M1-3 T1 Port Configuration Menu
D DS3 Clock—Clock source for the module selected
from 2 options.
Network
Internal
I Inband Control—enables or disables the inband
control. Inband control uses part of the T3 overhead
for far end control. This option ensures control
regardless of carrier routing.
Enable
Disable
B Line Build Out—displays the line build out options.
• Normal = less than 250 feet to the first repeater.
• Long = more than 250 feet to the first repeater.
Normal
Long
E Equipment ID—displays an optional 10-character field to enter
an ID for the equipment connected to the M1-3.
L Location ID—displays an optional 11-character field to enter the
location ID.
F Frame ID—displays an optional 10-character field to enter the
frame ID.
U Unit ID—displays an optional 6-character field to enter the M1-3
unit ID.
A Facility ID—displays an optional 38-character field to enter the
facility ID.
P Port ID—displays an optional 28-character field to enter the port
ID.
G Test Signal ID—displays an optional 38-character field to enter
the generator ID.
X Exit this menu.
Command Description Option
-- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU -- -- M1-3 T1 PORT CONFIGURATION MENU --
Port 1
Port 1 Port 1 Port 1
I) in service yes
I) in service yes I) in service yes I) in service yes
F) frame format ESF
F) frame format ESF F) frame format ESF F) frame format ESF
T) trunk condition bits(A/B) 0/0
T) trunk condition bits(A/B) 0/0 T) trunk condition bits(A/B) 0/0 T) trunk condition bits(A/B) 0/0
X) exit this menu
X) exit this menu X) exit this menu X) exit this menu