Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 26)

Quick Set-Up
2-8 Verilink M1-3 User Manual
M1-3 to QUAD T1 To map the M1-3, T1 number 17 to the QUAD T1, net port 1, do the
following:
1. Start from the Circuit Build Manager menu, type “A” (Add
Circuit).
Figure 2-8 Add Circuit Menu
2. From the Add Circuit Menu type “N”.
Type a name for the M1-3 to QUAD T1 circuit (for example
“m13_17_quadt1_1”).
3. Type “M”. Type “1” (only 64k mode is supported) .
4. Type “SP” (source port). Enter the shelf number, a comma, and
the slot number of the M1-3 (1,6).
5. Type “DP” (destination port). Type the shelf number, a comma,
and the slot number for the QUAD T1 (1,3). Type “1” (net1).
6. Type “ST” (source T1). Choose T1 number 17.
7. From the Add Circuit Menu select option “SM” (source
mapping). Choose timeslots 1 through 24 (1-24).
8. Type “DM” (destination mapping). Choose all 24 timeslots (1-
24).
9. Type “S” to setup the circuit. A message appears Successful Successful Successful Successful
Circuit Build Circuit Build Circuit Build Circuit Build, then displays the Edit Circuit Menu ( Figure 2-9 ).
-- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 -- -- ADD CIRCUIT MENU [1,1] SCM Firmware 1.18 --
N) name: -- M) mode: -- N) name: -- M) mode: -- N) name: -- M) mode: -- N) name: -- M) mode: --
SP) src port: [-,-] undefined DP) dst port: [-,-] undefined SP) src port: [-,-] undefined DP) dst port: [-,-] undefined SP) src port: [-,-] undefined DP) dst port: [-,-] undefined SP) src port: [-,-] undefined DP) dst port: [-,-] undefined
--port rate selection-- --port rate selection--
--port rate selection-- --port rate selection-- --port rate selection-- --port rate selection-- --port rate selection-- --port rate selection--
( undefined port ) ( undefined port )
( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port )
( undefined port ) ( undefined port )
( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port )
( undefined port ) ( undefined port )
( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port )
( undefined port ) ( undefined port )
( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port ) ( undefined port )
bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<- bus: AUT ->-->>->> Circuit Inactive <<-<<--<-
S) setup X) exit S) setup X) exit S) setup X) exit S) setup X) exit
A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM >