Verilink M1-3 (880-503136-001) Product Manual - Manual (Page 73)

Index
Verilink M1-3 User Manual Index-1
A
AIS (Alarm Indication Signal) 4-7
AISS (Alarm Indication Signal Second) 4-5
alarm reporting 4-3
alarm status 5-1
alarm transmission 5-1
alarm, critical 4-4
alarm, major 4-4
alarm, minor 4-4
APA (Advanced Programmable Architecture) 1-4
ASCII terminal interface 3-2
C
CCV (C-bit Coding Violation) 4-5, 4-7
CES (C-bit Errored Second) 4-5, 4-7
CIM (connector interface module) 2-2
configuration, loopbacks 5-1
CSES (C-bit Severely Errored Second) 4-5, 4-7
D
DS3 Local Loopback 5-5
DS3 loopback options 5-5
E
ESF mode 5-10
Example Configuration 2-2
F
FEAC (far end control) 2-4
Flash 1-4
framing format 2-5
I
inband control 2-4
inband loop-up code 5-6, 5-9
L
LCV (Line Coding Violation) 4-5, 4-7
LED, amber 1-3
LED, green 1-3
LED, red 1-3
LED, system 4-1, 4-3
LED, T1 4-1, 4-2
LED, T3 4-1, 4-2
LES (Line Errored Second) 4-5, 4-8
line coding 2-4
line type 2-4
LOF (Loss of Frame) 4-8
LOFS (Loss of Frame Second) 4-5
loopback status reporting 5-1
Loopback, DS3 Line 5-6
Loopback, DS3 Local 5-5
Loopback, FEAC Far End 5-6
Loopback, Inband Far End 5-7
loopback, local DS3 5-5
loopback, T1 line 5-9, 5-10
loopback, T1 local 5-8
loop-down code 5-6, 5-9
LOSS (Loss of Signal Second) 4-5, 4-8
LSES (Line Severely Errored Second) 4-5, 4-8
LUAS (Local Unavailable Second) 4-7, 4-8
M
major alarm 4-5
minor alarms 4-5
P
PCV (P-bit Coding Violation) 4-5, 4-8
PES (P-bit Errored Second) 4-6, 4-8
power-on self-test 4-1
PSES (P-bit Severely Errored Second) 4-5, 4-8
R
register report 4-7
S
SEFS (Severely Errored Framing Second) 4-6, 4-8
statistics buffer 4-1
T
T3 port 2-4
threshold values 4-6
Y
yellow alarm 5-12