Wavecom W61PC V7.5.0 - Manual (Page 188)

178  Transmission Modes WAVECOM Decoder W61PC/LAN Manual V7.5
Parameter Value
Operation modes Analogue Selcal
Modulation FM, SUB Tones
Receiver settings FM, BW = 12 kHz
Input format(s) AF, IF
If there more than two identical digits are to be transmitted the repetition tone is appended to the digit
tone (e.g. 22222 is transmitted as f2 fw f2 fw f2, where f2 is the tone for "2" and fw is the repetition
tone).
For MODAT mode having nominal tone durations of 40 ms, the duration of a single tone may vary ± 5 ms.
Decoding the selective calls is started by clicking on a system. If transmission and system selection con-
form, the call sign is displayed on the monitor. In the Options menu a Time stamp function can be ena-
bled to add date and time to each call.
Tone Allocation
Digit Hz Digit Hz
0 637.5 6 1537.5
1 787.5 7 1687.5
2 937.5 8 1837.5
3 1087.5 9 1937.5
4 1237.5 E (REPETITION) 487.5
5 1387.5 TONE DURATION 40 ms
Fax & MODEMS Half-Duplex
FAX-G3-V.17
Parameter Value
Frequency range 2-Wire
Operation modes FAX Modem
Modulation 128QAM, HDX
Speed 14400/12000/ 9600/7200 bps
Input format(s) AF
Additional information see “ Modem and FAX modes ” on page 280.
FAX-G3-V.27ter
Parameter Value
Frequency range 2-Wire
Operation modes FAX Modem
Modulation D8PSK,HDX
Speed 4800 bps
Input format(s) AF
Additional information see “ Modem and FAX modes ” on page 280.