Wavecom W61PC V7.5.0 - Manual (Page 46)

36  First start WAVECOM Decoder W61PC/LAN Manual V7.5
Pressing Change Order will reverse the polarity of the signal and pressing Default ST will restore the de-
fault value.
By right-clicking on the display a menu appears.
SAT Settings…
For the SAT Modes, additional parameters can be set in the Options | SAT Settings dialog box.
These settings are:
 Service: Select the service to monitor. Choose between:
FAX/DATA/TEL/HSD/TELX_SM/TELX_MM. There are two different possibilities for monitoring
telex: