H3C Technologies H3C SR8800 User Manual
Page 144
133
[RouterD-mpls] mpls te cspf
[RouterD-mpls] mpls te ds-te mode ietf
[RouterD-mpls] quit
[RouterD] interface GigabitEthernet 3/1/1
[RouterD-GigabitEthernet3/1/1] mpls
[RouterD-GigabitEthernet3/1/1] mpls te
[RouterD-GigabitEthernet3/1/1] mpls rsvp-te
[RouterD-GigabitEthernet3/1/1] quit
4.
Configure IS-IS TE
# Configure Router A.
[RouterA] isis 1
[RouterA-isis-1] cost-style wide
[RouterA-isis-1] traffic-eng level-2
[RouterA-isis-1] quit
# Configure Router B.
[RouterB] isis 1
[RouterB-isis-1] cost-style wide
[RouterB-isis-1] traffic-eng level-2
[RouterB-isis-1] quit
# Configure Router C.
[RouterC] isis 1
[RouterC-isis-1] cost-style wide
[RouterC-isis-1] traffic-eng level-2
[RouterC-isis-1] quit
# Configure Router D,
[RouterD] isis 1
[RouterD-isis-1] cost-style wide
[RouterD-isis-1] traffic-eng level-2
[RouterD-isis-1] quit
5.
Configure MPLS TE attributes of links
# Configure the maximum bandwidth and bandwidth constraints on Router A.
[RouterA] interface GigabitEthernet 3/1/1
[RouterA-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000
[RouterA-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth rdm 10000 bc1 8000
bc2 5000 bc3 2000
[RouterA-GigabitEthernet3/1/1] quit
# Configure the maximum bandwidth and bandwidth constraints on Router B.
[RouterB] interface GigabitEthernet 3/1/1
[RouterB-GigabitEthernet3/1/1] mpls te max-link-bandwidth 10000
[RouterB-GigabitEthernet3/1/1] mpls te max-reservable-bandwidth rdm 10000 bc1 8000
bc2 5000 bc3 2000
[RouterB-GigabitEthernet3/1/1] quit
[RouterB] interface POS 2/1/1
[RouterB-POS2/1/1] mpls te max-link-bandwidth 10000
[RouterB-POS2/1/1] mpls te max-reservable-bandwidth rdm 10000 bc1 8000 bc2 5000 bc3
2000
[RouterB-POS2/1/1] quit