Configuring inter-as vpn, Configuration prerequisites – H3C Technologies H3C SR8800 User Manual

Page 268

Advertising
background image

257

Step Command

Remarks

12.

Advertise a default route
destined for a VPN instance to

a peer or peer group.

peer { group-name | ip-address }
default-route-advertise

vpn-instance vpn-instance-name

Optional.
By default, no default route is

advertised to a peer or peer group.

13.

Apply a filtering policy to a
peer or peer group.

peer { group-name | ip-address }
filter-policy acl-number { export |

import }

Optional.
By default, no filtering policy is

applied to a peer or peer group.

14.

Apply a route filtering policy
based on IP prefix list to a

peer or peer group.

peer { group-name | ip-address }
ip-prefix prefix-name { export |
import }

Optional.
By default, no route filtering policy

based on IP prefix list is applied to

a peer or peer group.

15.

Specify not to change the next
hop of a route when

advertising it to an EBGP

peer.

peer { group-name | ip-address }
next-hop-invariable

Optional.
By default, a device uses its

address as the next hop when
advertising a route to its EBGP

peer.

16.

Specify the preference value
for the routes received from

the peer/peer group.

peer { group-name | ip-address }
preferred-value value

Optional.
0 by default.

17.

Make BGP updates to be sent

carry no private AS numbers.

peer { group-name | ip-address }
public-as-only

Optional.
By default, a BGP update carries
private AS numbers.

18.

Apply a routing policy to a

peer or peer group.

peer { group-name | ip-address }
route-policy route-policy-name
{ export | import }

Optional.
By default, no routing policy is
applied to a peer or peer group.

NOTE:

For information about BGP routing, see

Layer 3—IP Routing Configuration Guide.

Configuring inter-AS VPN

If the MPLS backbone on which the VPN routes rely spans multiple ASs, you need to configure inter-AS

VPN.
Three inter-AS VPN solutions are available. You can choose them as required.

Configuration prerequisites

Before you configure inter-AS VPN, complete the following tasks:

•

Configure an IGP for the MPLS backbones in each AS to implement IP connectivity of the backbones

in the AS

•

Configure basic MPLS capabilities for the MPLS backbones of each AS

•

Configure MPLS LDP for the MPLS backbones so that LDP LSPs can be established

•

Configure basic MPLS L3VPN for each AS

Advertising