H3C Technologies H3C SR8800 User Manual

Page 406

Advertising
background image

395

[PE3-bgp] peer 6.6.6.9 as-number 100

[PE3-bgp] peer 6.6.6.9 connect-interface loopback 0

[PE3-bgp] ipv6-family vpnv6

[PE3-bgp-af-vpnv6] peer 6.6.6.9 enable

[PE3-bgp-af-vpnv6] quit

[PE3-bgp] quit

NOTE:

The configurations for PE 4 are similar to those for PE 3. (Details not shown)

6.

Verify your configurations
# Issue the display ip routing-table command on PE 1 and PE 2. The output shows that only routes
of the provider carrier network are present in the public network routing table of PE 1 and PE 2.

Take PE 1 as an example:

[PE1] display ip routing-table

Routing Tables: Public

Destinations : 7 Routes : 7

Destination/Mask Proto Pre Cost NextHop Interface

3.3.3.9/32 Direct 0 0 127.0.0.1 InLoop0

4.4.4.9/32 ISIS 15 10 30.1.1.2 POS2/1/2

30.1.1.0/24 Direct 0 0 30.1.1.1 POS2/1/2

30.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

30.1.1.2/32 Direct 0 0 30.1.1.2 POS2/1/2

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

# Issue the display ip routing-table vpn-instance command on PE 1 and PE 2. The output shows
that the internal routes of the customer carrier network are present in the VPN routing tables. Take

PE 1 as an example:

[PE1] display ip routing-table vpn-instance vpn1

Routing Tables: vpn1

Destinations : 11 Routes : 11

Destination/Mask Proto Pre Cost NextHop Interface

1.1.1.9/32 ISIS 15 20 11.1.1.1 POS2/1/1

2.2.2.9/32 ISIS 15 10 11.1.1.1 POS2/1/1

5.5.5.9/32 BGP 255 0 4.4.4.9 NULL0

6.6.6.9/32 BGP 255 0 4.4.4.9 NULL0

10.1.1.0/24 ISIS 15 20 11.1.1.1 POS2/1/1

11.1.1.0/24 Direct 0 0 11.1.1.1 POS2/1/1

11.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

11.1.1.2/32 Direct 0 0 11.1.1.2 POS2/1/1

20.1.1.0/24 BGP 255 0 4.4.4.9 NULL0

21.1.1.0/24 BGP 255 0 4.4.4.9 NULL0

21.1.1.2/32 BGP 255 0 4.4.4.9 NULL0

# Issue the display ipv6 routing-table vpn-instance command on PE 1 and PE 2. The output shows
that their VPN routing tables do not contain the VPN routes that the customer carrier maintains.
Issue the display ip routing-table command on CE 1 and CE 2. The output shows that the internal
routes of the customer carrier network are present in the public network routing tables. Take CE 1

as an example:

Advertising