H3C Technologies H3C Intelligent Management Center User Manual
Page 110
103
Manual restoration allows you to restore the IMC database files to the files of the specified backup time
point. Make sure IMC is started at least once after installation and the backup database files exist.
Manual restoration includes the following types:
•
Locally Restore—Applicable to scenarios where all backup files are saved on the master server. For
example, manually backed up files, backup files uploaded to the master server, and backup files
uploaded by using FTP.
•
Remotely Restore—Applicable to scenarios where backup files are saved on the master and
subordinate servers. The master server locates the path that saves the backup files on the master
and subordinate servers and then restores them. Before performing remote restoration, you must
configure automatic backup and restoration parameters. Then DBMan can automatically locate
running configuration files and database files.
To perform a manual restoration:
1.
Start the Intelligent Deployment Monitoring Agent on the master server.
2.
Click the Environment tab.
3.
Click Restore.
The Restoration Type dialog box appears.
Figure 89 Restoration Type dialog box
4.
Perform one of the following operations:
If all backup files are saved on the master server:
a.
Click Locally Restore.
The Confirm dialog box appears.
Figure 90 Confirmation dialog box
b.
Click Yes.
The dialog box for selecting the databases to restore appears.
c.
Select database files to be restored and click OK.
The Confirm dialog box appears.