H3C Technologies H3C Intelligent Management Center - Manual (Page 70)

63
Figure 57 Information about component deployment
14. Start IMC on the master server:
a. Start the Intelligent Deployment Monitoring Agent:
− On Windows, select Start > All Programs > H3C Intelligent Management Center > H3C
Deployment Monitoring Agent.
− On Linux, run the dma.sh script in the /deploy directory of the IMC installation path.
b. On the Monitor tab, click Start IMC.
A confirmation dialog box appears.
c. Click OK to start the IMC service.
Installing and deploying TAM
TAM has only one subcomponent TACACS+ Authentication Manager that can be deployed on either the
master or a subordinate server. This example deploys TAM on the master server.
To install and deploy TAM on the master server:
1. Install TAM on the master server in the same way NTA is installed. (Details not shown.)
For information about the installation procedures, see "
Installing NTA ."
2. In the Installation Completed window (see Figure 58 ), select Open deployment monitoring agent.