Deploying a single imc platform subcomponent – H3C Technologies H3C Intelligent Management Center User Manual
Page 42
35
Figure 27 Information about component deployment
9.
On the master server, select Start > All Programs > H3C Intelligent Management Center > H3C
Deployment Monitoring Agent (or run the dma.sh script in /deploy of the IMC installation path on
Linux).
10.
In the displayed window, select the Monitor tab and click Start IMC. A dialog box appears asking
you if you want to start the IMC service.
11.
Click OK.
After all processes start, IMC is ready for use.
Deploying a single IMC Platform subcomponent
To deploy a single IMC component, use either of the following methods in the window, as shown
in
•
Method 1:
Right-click the target component and select Deploy the Component from the shortcut menu.
•
Method 2:
a.
Select any target component and select Batch deploy from the shortcut menu.
The Batch deploy dialog box appears.
b.
Select the component and click OK.
Some IMC components depend on others. When deploying such components, consider the
dependencies between components. On the Deploy tab, select Show Dependencies from the right-click
menu of a component to view the components in which the selected component depends. When the
component does not depend on any components, Show Dependencies is grayed out.
The detailed deployment procedure for a single component is similar to the batch deployment.