H3C Technologies H3C Intelligent Management Center User Manual
Page 64
Advertising
57
11.
Click Deploy.
12.
In the Configure Policy Server window (see
), enter the IP address of the host where Policy
Server is to be deployed in the Policy Server's IPv4 Address field. In this example, use the default
value of the parameter.
Figure 47 Configure Policy Server
13.
Click Deploy.
14.
In the Configure User SelfService window (see
), enter the IP address of the host where
User SelfServer is to be deployed in the User SelfServer's IPv4 Address field. In this example, use
the default value of the parameter.
Advertising