H3C Technologies H3C Intelligent Management Center - Manual (Page 54)

47
After the installation is complete, the Installation Completed window appears, as shown in Figure
35 .
Figure 35 Installation Completed
11. Perform either of the following operations:
{
To start to deploy IMC NTA, select Open deployment monitoring agent.
{
To continue to install other IMC components, select Install other IMC Components.
In this example, select Open deployment monitoring agent.
12. Click Finish.
Deploying NTA subcomponents on the master server
1. In the Installation Completed window (see Figure 35 ), select Open deployment monitoring agent
and then click Finish.
The system automatically starts the Intelligent Deployment Monitoring Agent and displays the
Batch deploy window, as shown in
Figure 36 .