W (see, Figure 55, Enter the ip address o – H3C Technologies H3C Intelligent Management Center User Manual
Page 69
Advertising
![background image](/files/813096/content/doc069.png)
62
Figure 55 Configure User Access Management Sever
11.
Click Deploy.
After the deployment is complete, the Batch deploy result dialog box appears, as shown in
.
Figure 56 Batch deploy result
12.
Click OK.
13.
Click the Deploy tab on the Intelligent Deployment Monitoring Agent.
When these subcomponents are deployed only on a subordinate server, an entry with Undeployed
status appears in the deployment entry list, as shown in
.
Advertising