H3C Technologies H3C Intelligent Management Center - Manual (Page 121)

114
4. Select the System managed size option, click Set, and click OK.
After an error occurs in deployment or upgrade of a component, the component remains to be in
Deploying or Upgrading state in the IMC Intelligent Deployment Monitoring Agent on the master server.
How to solve the problem?
IMC does not actively refresh the component states. To view the latest state of the component:
1. Stop the IMC Intelligent Deployment Monitoring Agent and quit the program.
2. Restart the H3C IMC server service.
3. Open and start the IMC Intelligent Deployment Monitoring Agent on the master or subordinate
server.
When a subordinate server is faulty and cannot be rectified, how to handle the components that are
deployed on the server?
You can undeploy the components from the faulty subordinate server and deploy them to an available
subordinate server. To do that:
1. Open the IMC Intelligent Deployment Monitoring Agent on the master server and click the Deploy
tab.
2. Right-click a target component and select Undeploy the Component (Master only) from the shortcut
menu. This option appears only when the master server cannot connect to one or multiple
subordinate servers. Repeat this step to undeploy more components.
3. Deploy the components to another subordinate server.
The component data is deleted from the subordinate server when you undeploy the components. Make
sure the subordinate server has a secure data backup or uses a remote database. Otherwise, the data
is lost.