H3C Technologies H3C Intelligent Management Center - Manual (Page 94)

87
The installation wizard installs the components.
Upgrading components on the master server
After the installation is finished, the Batch upgrade window appears, as shown in Figure 77 .
Figure 77 Batch upgrade
1. Select the components you want to upgrade and click OK.
After the selected components are upgraded, the Batch upgrade result window appears, as shown
in
Figure 78 .
Figure 78 Batch upgrade result
2. Click OK.
If you have used DBMan for IMC auto backup or restoration before upgrade, the Auto Backup and
Restore Configuration window appears after you click OK.
3. Click OK in the Auto Backup and Recovery Settings window to upgrade automatic backup and
restoration configuration.
Upgrading components on a subordinate server
In distributed deployment, upgrade all components deployed on subordinate servers separately.