H3C Technologies H3C Intelligent Management Center - Manual (Page 76)

69
3. Click the Deploy tab in the Intelligent Deployment Monitoring Agent.
The Deploy tab displays all IMC components that have been installed and their deployment
information.
4. Right-click any component in the list, and then select Batch Deploy from the shortcut menu.
The Batch deploy window displays components that are not deployed, as shown in
Figure 66 .
Figure 66 Batch deploy
5. Select subcomponents you want to deploy. In this example, select MPLS VPN Manager - MPLS TE
Management and MPLS VPN Manager - L2VPN Management.
6. Click OK to start the deployment.
7. In the Please Choose L2VPN Global Parameter Operate window (see Figure 67 ), configure the
L2VPN parameters as needed. This example uses the default values of the parameters.
If BGP(Boarder Gateway Protocol) is selected for VPLS(Virtual private LAN service), VLL(virtual
leased line) and PBB(provider backbone bridge) options are automatically cleared.