SMA SC 200 Installation - Manual (Page 27)

SMA Solar Technology AG Installation
Installation Guide SC20_25_35-IEN094521 27
4.5 Assembly at the Installation Site
The Sunny Centrals have a high dead weight. Additional anchoring in the floor or in the wall is
unnecessary.
4.5.1 Connecting Switch Cabinets to one Another
If you are using a Sunny Central 200 / 250 with the "Protection against chemically active substances"
option, the switch cabinets must be connected to one another as described below.
1. Attach the included sealing material all around the cabinet frame of the AC cabinet.
2. Install the switch units at the installation site.
Enclosed documentation of the switch cabinet manufacturer
Follow the instructions in the enclosed documentation of the switch cabinet manufacturer to
connect the two switch cabinets to one another. The assembly procedure is described
there.
A Seal material