Select station type, Station configuration – Yaskawa V7 PROFIBUS-DP User Manual
Page 26
Network Configuration 2-4
Select Station Type
Select the appropriate station type from the list displayed. The V7 PROFIBUS-DP Option is listed as PROFIBUS-DP INTER. Highlight
the selection and click on the Configure button.
Figure 2.3 – Select Station Type
Station Configuration
Select the configuration desired. Basic Data consists of 3 word I/Os, combined input/output. Extended Data 1 consists of 16 input words
and 16 output words. Extended Data 2 consists of 6 input words and 6 output words.
Figure 2.4 – Select Configuration
The Basic Data configuration consists of 6 words of combined I/O. 3 input words and 3 output words. Refer to 3 Word I/O
Message section of Chapter 3 for a detailed description of the Basic Data configuration.
Figure 2.5 – Basic Data Configuration