Flash control – Sony ILCA-99M2 User Manual

Page 153

Advertising
background image

HVL-F60M, HVL-F43M and HVL-F32M can be used as clip-ons, off-camera connected by a
cable, and for wireless flash shooting (controller/remote).
HVL-F20M can be used as a clip-on, off-camera connected with a cable, and for wireless
flash shooting (controller).

Note

The FEL lock cannot be set when a flash is not attached.

If a flash that does not support the FEL lock is attached, an error message is displayed.

When both AE and FEL lock are fixed,

lights up.

Hint

By setting [FEL Lock hold], you can hold the setting while the button is pressed down. Also, by
setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.], you can shoot images with the AE locked in
the following situations.

When [Flash Mode] is set to [Flash Off] or [Autoflash].
When the flash cannot go off.
When using an external flash that is set to manual flash mode.

[135] Shooting

Using the flash

Flash control

Sets the method for determining the intensity of flash output.

Menu item details

ADI flash:

The camera's flash control uses the focus distance information and brightness value of the
subject when the pre-flash is reflected.
This gives precise flash control without hardly being affected by the reflective level of the
subject.

Pre-flash TTL:

The camera's flash control uses the brightness value of the subject when the pre-flash is
reflected. If this setting is used, the camera's ability to precisely measure the flash light may be
affected by reflections from the subject.

ADI: Advanced Distance Integration
P-TTL: Pre-flash, Through the lens

MENU

(Camera Settings1)

→ [Flash control] → desired setting.

1

Advertising