Sony ILCA-99M2 - Manual (Page 195)

Some devices may not work properly when connected to this product. For example, they may not
output video or audio.
Use an HDMI cable with the HDMI logo or a genuine Sony cable.
Use an HDMI cable that is compatible with the HDMI micro terminal of the product and the HDMI
jack of the TV.
When [ TC Output] is set to [On], the image may not be output properly to the TV or recording
device. In such cases, set [ TC Output] to [Off].
If images do not appear on the TV screen properly, select MENU
→
(Setup)
→ [HDMI Settings]
→ [HDMI Resolution] → [2160p/1080p], [1080p] or [1080i] according to the TV to be connected.
During HDMI output, when you switch the movie from 4K to HD image quality or vice-versa, or
change the movie to a different frame rate, the screen may become dark. This is not a malfunction.
[181] Customizing the camera Registering frequently used functions
Memory (Camera Settings1/Camera Settings2)
Allows you to register up to 3 often-used modes or product settings to the product and up to 4
(M1 through M4) to the memory card. You can recall the settings using just the mode dial.
Items that can be registered
You can register various functions for shooting. The items that can actually be registered are
displayed on the menu of the camera.
Aperture (F number)
Shutter speed
To change registered settings
Change the setting to the desired one and re-register the setting to the same mode number.
Note
M1 through M4 can be selected only when a memory card is inserted into the product.
Set the product to the setting you want to register. 1
MENU
→
(Camera Settings1)
→ [
/ Memory]
→ desired number.
2
Press the center of the multi-selector to confirm. 3