Sony ILCA-99M2 - Manual (Page 213)

operations to prevent wearing down the battery pack. To return to shooting mode, perform an
operation such as pressing the shutter button halfway down.
Menu item details
30 Min/5 Min/2 Min/1 Min/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function is not activated when playing back slideshows, when recording movies, or
when connected to a computer or TV.
[210] Customizing the camera Camera settings
Remote Ctrl
You can operate this product and shoot images using the SHUTTER button, 2SEC button (2
second delay shutter), and START/STOP button (or Movie button (RMT-DSLR2 only)) on the
Wireless Remote Commander RMT-DSLR1 (sold separately) and RMT-DSLR2 (sold
separately). Refer also to the operating instructions for the Wireless Remote Commander.
Menu item details
On:
Allows remote commander operation.
Off:
Does not allow remote commander operation.
Note
The lens or lens hood may block the remote sensor that receive the signals. Use the remote
commander in the position from which the signal can reach the product.
When [Remote Ctrl] is set to [On], the product does not switch to power save mode. Set [Off] after
using a remote commander.
MENU
→
(Setup)
→ [Pwr Save Start Time] → desired setting.
1
MENU
→
(Setup)
→ [Remote Ctrl] → desired setting.
1