Sony ILCA-99M2 - Manual (Page 343)

Ctrl w/ Smartphone:
Sets whether to connect the camera and a smartphone using Wi-Fi. ([On]/[Off])
Connection Info.:
Displays the QR code or SSID used to connect the camera to a smartphone.
[368] List of MENU items Wireless
Airplane Mode
When you board an airplane, etc., you can temporarily disable all the wireless-related functions
including Wi-Fi.
[369] List of MENU items Wireless
Wi-Fi Settings: WPS Push
If your access point has the Wi-Fi Protected Setup (WPS) button, you can register the access
point to this product easily by pushing the Wi-Fi Protected Setup (WPS) button.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your
access point supports the Wi-Fi Protected Setup (WPS) button method. If the security setting is set
to WEP or your access point does not support the Wi-Fi Protected Setup (WPS) button method,
perform [Access Point Set.].
For details about the available functions and settings of your access point, see the access point
operating instructions or contact the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the type of wall
material or if there is an obstruction or poor wireless signal between the product and access point. If
MENU
→
(Wireless)
→ [Airplane Mode] → desired setting.
If you set [Airplane Mode] to [On], an airplane mark will be displayed on the screen.
1
MENU
→
(Wireless)
→[Wi-Fi Settings] → [WPS Push].
1
Press the WPS button on the access point you want to register. 2