Sony ILCA-99M2 - Manual (Page 410)

[444] If you have problems
Warning messages
Set Area/Date/Time.
Set the area, date and time. If you have not used the product for a long time, charge the
internal rechargeable backup battery.
Power insufficient.
The image sensor cleaning function will not operate because the remaining battery level is
low. Recharge the battery pack or use the AC Adaptor (sold separately).
Unable to use memory card. Format?
The memory card was formatted on a computer and the file format was modified. Select
[Enter] and then format the memory card. You can use the memory card again, however, all
previous data in the memory card is erased. It may take some time to complete the format. If
the message still appears, change the memory card.
Memory Card Error
An incompatible memory card is inserted.
Formatting has failed. Format the memory card again.
Unable to read memory card. Reinsert memory card.
An incompatible memory card is inserted.
The memory card is damaged.
The terminal section of the memory card is dirty.
Memory card locked.
You are using a memory card with a write-protect switch or a delete-protect switch with the
switch set to the LOCK position. Set the switch to the record position.
Cannot open the shutter since the memory card is not inserted.
No memory card has been inserted into the memory card slot selected in [Select Rec.
Consult your dealer or local authorized service facility. Additional information on
this product and answers to frequently asked questions can be found at our
Customer Support Website.
http://www.sony.net/ 3