Sony ILCA-99M2 - Manual (Page 220)

camera without leaving the camera.
Menu item details
PC Only:
Saves still images only on the computer.
PC+Camera:
Saves still images on the computer and the camera.
Note
During PC Remote shooting, you cannot change settings for [Still Img. Save Dest.]. Adjust the
settings before you start shooting.
If you insert a memory card that is not recordable, you cannot shoot still images even if you select
[PC+Camera].
If you select [PC+Camera] and you have not inserted a memory card into the camera, you cannot
release the shutter even if [Release w/o Card] is set to [Enable].
During PC Remote shooting, [Recording Mode] is locked to [Standard] and cannot be changed.
While you are playing back still images on the camera, you cannot shoot using PC Remote.
[221] Customizing the camera Camera settings
PC Remote Settings: RAW+J PC Save Img
Selects the file type for images to be transferred to the computer in PC Remote shooting.
When shooting still images using PC Remote, the application on the computer does not display
the image until the image has been completely transferred. When performing RAW+JPEG
shooting, you can accelerate the display processing speed by transferring only JPEG images
instead of transferring both RAW and JPEG images.
Menu item details
RAW & JPEG:
Transfers both RAW and JPEG files to the computer.
PC Remote: Uses "Remote Camera Control" to control this product from the computer, including such functions
as shooting and storing images on the computer. *
MENU
→
(Setup)
→ [PC Remote Settings] → [Still Img. Save Dest.] → desired
setting.
1
PC Remote: Uses "Remote Camera Control" to control this product from the computer, including such functions
as shooting and storing images on the computer. *
MENU
→
(Setup)
→ [PC Remote Settings] → [RAW+J PC Save Img] → desired
setting.
1