Sony ILCA-99M2 - Manual (Page 390)

This product conforms with DCF (Design rule for Camera File system) universal standard
established by JEITA (Japan Electronics and Information Technology Industries Association).
Playback of images recorded with your product on other equipment and playback of images
recorded or edited with other equipment on your product are not guaranteed.
Notes on playing movies on other devices
XAVC S movies can be played back only on XAVC S-supported devices.
On the monitor, viewfinder and lens
Do not press against the monitor. The monitor may be discolored and that may cause a
malfunction.
If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the monitor
stays wet, the surface of the monitor may change or deteriorate. This may cause a
malfunction.
If the subject is too close, the image may show any dust or fingerprints on the lens. Wipe the
lens with a soft cloth, etc.
Make sure not to bump the lens or subject it to force.
Do not carry the camera by the monitor.
Magnets are attached to the camera body and the back of the monitor. Do not insert any
magnetically recorded media, such as floppy disks or credit cards between them.
Notes on discarding or transferring this product to others
When discarding or transferring this product to others, make sure to perform the following
operation to protect private information.
Select [Setting Reset]
→ [Initialize] → [OK] → [OK].
Notes on location information
If you upload and share an image tagged with a location, you may accidentally reveal the
information to a third party. To prevent third parties from obtaining your location information, set
[
Loc. Info. Link Set.] to [Off] before shooting images.
[434] Precautions/This product
On cleaning
Cleaning the lens
Do not use a cleaning solution containing organic solvents, such as thinner, or benzine.
When cleaning the lens surface, remove dust with a commercially available blower. In case