Self-timer [63, Self-timer – Sony ILCA-99M2 User Manual

Page 92

Advertising
background image

The shooting mode is set to [Sweep Panorama].
[Picture Effect] is set to one of the following: [Rich-tone Mono.]
[DRO/Auto HDR] is set to [Auto HDR].

[63] Shooting

Selecting a drive mode (Continuous shooting/Self-timer)

Self-timer

Shoots an image using the self-timer after a designated number of seconds have elapsed since
the shutter button was pressed. Use the 5-second/10-second self-timer when you are going to
be in the picture, and use the 2-second self-timer to reduce camera-shake caused by pressing
the shutter button.

Menu item details

Sets the number of seconds in which the picture is taken after the shutter button is pressed.

Self-timer: 10 Sec

Self-timer: 5 Sec

Self-timer: 2 Sec

Hint

Press the shutter button again or press

/

(Drive Mode) button to stop the count of the self-

timer.

Press the

/

(Drive Mode) button and select

(Single Shooting) to cancel the self-timer.

Set [Audio signals] to [Off] to mute the beep sound during self-timer counting.

/

(Drive Mode) button

→ [Self-timer].

You can also set the drive mode by selecting MENU

(Camera Settings1)

[Drive Mode].

1

Select the desired mode by pressing the multi-selector right/left.

2

Adjust the focus and shoot the image.

The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated
number of seconds have elapsed.

3

Advertising