TA Triumph-Adler 1855 - Manual (Page 111)

5-32
Operation on the Machine > Scanning
Scan the Image to the Specified Destination
It is easy to scan from the operation panel on the machine. Before using this function, you need to preset the destination
folder where to save scanned image and image quality using Client Tool. Refer to
Default Settings on the PC (Client
Tool) on page 7-16 .
Use the Preset Scan Destination
Save the scanned image in the preset scan destination. My Documents is set for the destination. Scanning can be
performed without preparing the destination.
1 Start Client Tool on the Host PC.
Refer to Accessing Client Tool on page 2-18 .
2 Press the [ Scan ] key on the machine.
3 Place the originals.
4 Press the [ Start ] key.
Scanning starts.
Loading Originals (page 5-2)
NOTE
• If [Local PC] is selected as the destination, an image is saved in "My Documents" in the
computer (Host PC) connected to the machine via USB.
Windows Vista/Windows 7/Windows 8: C:\Users\<user>\My Documents
Windows XP: C:\Document and Settings\<user>\My Documents
• When the scan ends, the folder in which an image is saved opens on the Host PC.
Ready to scan.
Local PC