TA Triumph-Adler 1855 - Manual (Page 61)

3-9
Preparation before Use > Loading Paper
2 Insert the appropriate paper size card in the slot to indicate the size of the paper inside.
5 Gently push the cassette back in.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in
the cassette. (Refer to Before Loading Paper on page 3-6 .)
• Before loading the paper, be sure that it is not curled or folded. Paper that is
curled or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
below).
• The paper length and width guides must be adjusted to the paper size before
loading the paper. Loading the paper without adjusting these guides may cause
skewed feeding and paper jams.
• Be sure that the paper length and width guides rest securely against the paper. If
there is a gap, readjust the guides to fit the paper.
.
NOTE
• If the machine will not be used for a prolonged period, protect all paper from humidity by
removing it from the cassettes and sealing it in the paper storage bag.
• Select the media type (plain, recycled, etc.) loaded in the cassette.
Specifying Paper Size and Media Type for the Cassettes (page 3-13)