TA Triumph-Adler 1855 User Manual
Page 182
Advertising
9-15
Troubleshooting > Troubleshooting
W
USB cable was
disconnected.
Is the USB cable connected?
Press the [
OK
] key and connect the
USB cable.
Is the PC powered on?
Press the [
OK
] key and turn the PC
power on.
―
Cannot find Client Tool.
Press the [
OK
] key and open Client
Tool.
Message Display
Checkpoints
Corrective Actions
Reference
Page
WasteTonerBox is full or not
installed.
―
The waste toner box is not installed
correctly. Set it correctly.
Is the waste toner box full?
Replace the waste toner box.
Message Display
Checkpoints
Corrective Actions
Reference
Page
Advertising