TA Triumph-Adler 1855 - Manual (Page 147)

7-21
System Menu and Client Tool > Default Settings on the PC (Client Tool)
Item Description
Resolution Select fineness of scanning resolution.
Value :
NOTE
[400×400 dpi] and [600×600 dpi] can be set only if [Monochrome] is set for Scan color.
Reverse image When this is selected, the image color reverses.
File name Assign a document name to scanned images. When there are multiple pages, a three-digit
incrementing number such as Scan_001, Scan_002... is appended to the end of the file name. Up to
16 characters can be entered.
File format Specify the image file format.
Value : BMP, JPEG, PNG, TIFF, PDF, High-Compression PDF, CCITT Group 4, Image Mask, High-
Compression PDF, JBIG2, Mask + Image Mask
File format settings (The item displayed changes depending on the value specified for File format.)
Quality Set the image quality. Increasing the number results in higher quality and decreasing the number
results in lower quality. Higher quality will make the stored files larger.
Value : 1 to 100
NOTE
• This setting is valid for PDF, TIFF, and JPEG file formats.
• Non-numeric characters cannot be entered. If entered number is beyond range, the max/min value
will be restored.
PDF/A-1 Set PDF/A-1 format type.
Value : Off, PDF/A-1a, PDF/A-1b
High Compression PDF
Quality Set the quality level for High Compression PDF.
Value : Standard, Compression Ratio Priority, Quality Priority
File separation
*1
*1 The optional document processor is required.
When this is selected, scanned data is separated into files page by page.
200×200 dpi 300×300 dpi 400×400 dpi 600×600 dpi