St u – TA Triumph-Adler 1855 User Manual
Page 181
9-14
Troubleshooting > Troubleshooting
S
T
U
Replace all originals and
press Start key.
―
Remove originals from the document
processor, put them back in their original
order, and place them again. Press the
[
OK
] key to resume printing. Press the
[
Stop
] key to cancel the job.
―
Replace MK.
―
Replacement of the parts in the
maintenance kit is necessary at every
150,000 pages of printing and requires
professional servicing. Contact your
Service Representative.
―
Restricted by Job
Accounting. (Print)
―
This job is canceled because it is
restricted by job accounting. Press the
[
OK
] key.
―
Restricted by Job
Accounting. (Scan)
―
This job is canceled because it is
restricted by job accounting. Press the
[
OK
] key.
―
Message Display
Checkpoints
Corrective Actions
Reference
Page
Scanner memory is full.
―
Scanning cannot be performed any
more due to insufficient memory of
scanner. Press the [
OK
] key to cancel
the job.
―
Set another cassette.
Have you selected Offset?
To use offsetting, the same size of paper
as the selected paper source must be
loaded in a different orientation in a
different paper source.
Shake the toner container.
―
Open the front cover of the machine and
pull out the toner container. Shake the
toner container well and reinstall it.
Message Display
Checkpoints
Corrective Actions
Reference
Page
Toner is low.
(Replace when empty.)
―
It is almost time to replace the toner
container. Obtain a new toner container.
―
Message Display
Checkpoints
Corrective Actions
Reference
Page
Unknown toner installed.PC
Does the installed toner container's
regional specification match the
machine's?
Install the specified toner container.
Message Display
Checkpoints
Corrective Actions
Reference
Page