Use your desired, Use your desired destination – TA Triumph-Adler 1855 User Manual
Page 112
5-33
Operation on the Machine > Scanning
Use Your Desired Destination
If there are settings that you change from "My Documents" in the computer (Host PC) connected to the machine via
USB, set the destination by using Client Tool. You can simply select the destination number as needed to recall those
functions.
Ten destinations including the default [Local PC] can be registered. Refer to
Default Settings on the PC (Client Tool) on
.
1
Start Client Tool on the Host PC.
Refer to
Accessing Client Tool on page 2-18
.
2
Press the [
Scan
] key on the machine.
3
Place the originals.
4
Select the destination number.
Press the [
▲
] or [
▼
] key to select a destination number (01 to 10) to recall, and press the [
OK
]
key.
5
Press the [
Start
] key.
Scanning starts.
When the scan ends, the folder in which an image is saved opens on the Host PC.
NOTE
The name set by using Client Tool appears. [----------------] appears for the destination for
which no name is set.
Ready to scan.
Local PC
2
1