Printer, Adjust/maint. (adjustment/maintenance) – TA Triumph-Adler 1855 User Manual
Page 141
7-15
System Menu and Client Tool > Default Settings on the Machine (System Menu)
Printer
When printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Adjust/Maint. (Adjustment/Maintenance)
Adjust printing quality and conduct machine maintenance.
Printer
Item
Description
Printer
FormFeed
TimeOut
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed.
When the preset timeout passes, the machine automatically prints the document. The
options are between 5 and 495 seconds.
Value
: 5 to 495 seconds
Adjust/Maint.
Item
Description
Adjust/
Maint.
Density Adj.
Adjust density.
Copy
Adjust copy density. Adjustment can be made in 7 levels.
Value
: Darker +3, Darker +2, Darker +1, Normal 0, Lighter -1, Lighter -2, Lighter -3
Scan
Adjust scan density. Adjustment can be made in 7 levels.
Value
: Darker +3, Darker +2, Darker +1, Normal 0, Lighter -1, Lighter -2, Lighter -3
Backgrnd Density
Darkens or lightens overall background density adjustment.
Copy
Darkens or lightens overall background density adjustment during copying. Adjustment
can be made in 7 levels.
Value
: Darker +3, Darker +2, Darker +1, Normal 0, Lighter -1, Lighter -2, Lighter -3
Scan
Darkens or lightens overall background density when scanning images. Adjustment can
be made in 7 levels.
Value
: Darker +3, Darker +2, Darker +1, Normal 0, Lighter -1, Lighter -2, Lighter -3
Correct. Bk Line
Correct fine lines (streaks caused by contamination), which may appear on the image,
when the document processor is used.
Value
Off: No correction performed.
On: Correction performed. The reproduction of fine lines on the original may
become lighter than when using [Off].
Service Settings
―
Drum Refresh
Remove white lines from the image.
Press the [
OK
] key and then select [Yes] to perform Drum Refresh.