TA Triumph-Adler DC 2025 - Manual (Page 105)

CHAPTER 6 FUNCTIONS
6-31
• Preset limit
Limit the number of copies that can be made at a time.
Display the “Copy default” screen. (See (2) Accessing
the copy default setting mode.)
Select “Preset limit” in the setting item list at the left-
hand side of the screen, and then touch the [Change #]
key.
The “Preset limit” screen will appear.
Touch the [+] key or [–] key to select copy preset in one
job.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
• Default erase width
Set the initial value of the erasing border width for the sheet erase
or the outer erasing border for the book erase in the border erase
mode.
Display the “Copy default” screen. (See (2) Accessing
the copy default setting mode.)
Select “Default erase width” in the setting item list at the
left-hand side of the screen, and then touch the [Change
#] key.
The “Default erase width” screen will appear.
Touch the [+] key or [–] key to adjust erase width.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications