TA Triumph-Adler DC 2025 - Manual (Page 49)

CHAPTER 5 FUNCTIONS
5-17
Touch the [Booklet] key.
The original/finish set-up screen will appear.
Select the type of original and finishing.
When the optional document finisher with the center
staple function is installed, the [Center Staple] key is dis-
played, allowing the center staple of up to 10 sheets (40
pages).
Press the [Start] key.
Scanning will start.
When originals are set in the Document Processor, copy-
ing will start after scanning the set originals.
When an original is set on the platen, a message for
scanning the next original appears. Go to the next step.
Replace the original and then press the [Start] key.
Scanning will start.
When all originals are scanned, touch the [Scanning fin-
ished] key. Copying will start.
6
7
5
Inch specifications
Metric specifications
4
8
→ →
Start
Stop/
Clear
Reset
1 2 3
4 5 6
7 8 9
0