TA Triumph-Adler DC 2025 - Manual (Page 48)

CHAPTER 5 FUNCTIONS
5-16
8. Making a booklet (sheet originals) [Booklet copy mode]
This mode can be used to copy one-sided or two-sided originals
onto two-page [open-face], two-sided copies in such a way that
the finished copies can be stacked and folded into a booklet for-
mat.
IMPORTANT
(Inch specifications)
• The size of originals that can be used in this mode is limited to
11"
✕
8 1/2" and the paper size is limited to 11"
✕
17", 8 1/2"
✕
14" and 8 1/2"
✕
11R".
(Metric specifications)
• The size of originals that can be used in this mode is limited to
A4 and the paper size is limited to A3, B4 and A4R.
1 1 1 1 1 Finish: Right
The order of copying will be performed so that the stacked and
folded pages of the finished copies will read from right to left.
2 2 2 2 2 Finish: Left
The order of copying will be performed so that the stacked and
folded pages of the finished copies will read from left to right.
Set the originals in the Document Processor.
IMPORTANT
• Set the sheet originals with the top edge (short edge) facing the
rear side.
When the originals are set on the platen, set the first original.
Touch the [Function] key.
The Function screen will appear.
Touch the [Booklet] key.
The “Booklet” screen will appear.
1
Inch specifications
Metric specifications
3
Inch specifications
Metric specifications
b
b
a
a
8
7
6
5
4
3
2
1
7
8
6
5
2 3
1
4
2
1
3
4
7 6
8
5
1
2
2