TA Triumph-Adler P-C3065 MFP - Manual (Page 130)

7-4
Managing Jobs > Printing Administrative Reports (Result Report Setting)
Printing Administrative Reports (Result Report
Setting)
You can print various administrative reports to check the results of fax transmission or the status of the functional setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print the
transmitted image in the send result report.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key >
[Result Rpt Set.] > [OK] key > [▲] [▼] key > [Send Result] > [OK] key > [▲] [▼] key >
[FAX] > [OK] key
2
Configure the function.
1 [Off] (not to print), [On] (to print), [Error Only], or [Specify Each Job] > [OK] key
If you selected [On], [Error Only] or [Specify Each Job], printing of the transmitted image
can be set.
2 [Off] (not printing the transmitted image), [Partial Image] (print part of the transmitted
image at full size), or [Full Image] (print the entire transmitted image at reduced size) >
[OK] key
NOTE
When [Specify Each Job] is selected, it is possible to set a send result report when
transmitting.
FAX TX Report (page 3-24)
Send Result Report
Completed Completed
Send Result Report
With transmitted image Without transmitted