TA Triumph-Adler P-C3065 MFP - Manual (Page 40)

3-9
Sending Faxes > Methods For Entering the Destination
3
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
1 Select [Detail].
2 Select the item to change the settings for and then select [Edit] or [Change].
3 Select the [OK] key.
4
Select the [OK] key.
Entry of the destination finishes.
Key Description
Sub Address Set this to transmit using a Sub Address.
Sub Address Transmission (page 5-14)
Encrypted Transmission This is set when using encrypted transmission to send the
data.
Encryption (page 5-21)
TX Start Speed This is set to change the transmission start speed. Select the
speed from 33,600 bps, 14,400 bps, and 9,600 bps.
NOTE
Normally this should be used with the default setting.
ECM ECM is a communication mode specified by the ITU-T
(International Telecommunication Union) that retransmits data
when an error occurs. Fax machines that have ECM mode
check for errors as they communicate, preventing distortion of
the image due to noise on the line and other conditions.
NOTE
When On is selected in Check New Dest., a confirmation screen is displayed for the entered
FAX number. Re-enter the same FAX number and select [OK].
Machine’s Operation Guide
To send to multiple destinations, enter the next fax number and select the [OK] key. You can
send to as many as 100 destinations at once.