TA Triumph-Adler P-C3065 MFP - Manual (Page 56)

3-25
Sending Faxes > Using chain dial
Using chain dial
Chain dial is a function that allows you to dial by linking fax numbers of the receiving systems with a chain number
created with a number common to several destinations.
By setting multiple phone numbers from several telephone companies to a chain number, you can later choose the one
that costs the least to send the fax to a remote or international destination.
1
Select the [FAX] key.
2
Select the chain dial number
Enter the fax number to be added to the chain number. Select the address in which the chain
number is registered in the Address Book, One Touch Key or enter the chain number with the
numeric keys.
3
Select [Chain].
4
Enter the fax number to be added to the chain number.
When entering the FAX number using the numeric keys, continue entering the FAX number.
When entering the FAX number from Address Book, select the FAX number by selecting the
[Address Book] key.
When selecting the FAX number using the One Touch Key, select the registered One Touch
Key.
For the procedure for selecting a destination in the address book, refer to the following:
For the procedure for selecting the destination using the One Touch Key, refer to the following:
5
Select the [OK] key.
To select the next fax number, repeat steps from step 2.
6
Press the [Start] key.
The transmission will start.
NOTE
It is convenient to register chain numbers that are used frequently to the Address Book or One Touch Key.
For registration to the Address Book, refer to the following:
Adding a Destination (Address Book) (page 2-11)
For registration to One Touch Key, refer to the following:
Adding a Destination on One Touch Key (page 2-17)
Choosing from the Address Book (page 3-10)
Choosing by One Touch Key (page 3-11)
NOTE
When On is selected in Check New Dest., a confirmation screen is displayed for the entered
FAX number. Re-enter the same FAX number and select [OK].
Machine’s Operation Guide