TA Triumph-Adler P-C3065 MFP - Manual (Page 22)

2-9
Before Using the Fax Machine > Local FAX Information Entry
FAX Dialing Mode
Select the dialing mode according to the line type.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [FAX Dialing Mode] > [OK] key
2
Set the FAX Dialing Mode.
[Tone(DTMF)] or [Pulse(10pps)] > [OK] key
ECM TX
Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and other conditions.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [ECM TX] > [OK] key
2
Configure the settings.
[On] or [Off] > [OK] key
TX Start Speed
Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [TX Start Speed] > [OK] key
2
Configure the settings.
[9600bps], [14400bps] or [33600bps] > [OK] key
NOTE
This setting does not appear in some regions.
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than when [Off] is selected.
NOTE
Normally this should be used with the default setting.