TA Triumph-Adler P-C3065 MFP - Manual (Page 37)

3-6
Sending Faxes > Basic transmission procedure
Cancelling the Transmission
The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained here.
Cancelling Memory Transmission (while originals are being scanned)
1
Select the [Stop] key.
During memory transmission, to cancel scanning while originals are being scanned, select the
[Stop] key on the operation panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original output table.
Cancelling Memory Transmission (during communication)
1
Select the [Stop] key.
2
Display the cancel send job list screen.
[Cancel Send Job] > [OK] key
Display the cancel send job list screen.
3
Canceling Transmission.
1 Select the job to cancel.
2 [Menu] > [▲] [▼] key > [Cancel Job] > [OK] key > [Yes]
The selected job is deleted.
Cancelling Transmission (during communication)
Follow this procedure to break the connection and stop transmission/reception.
1
Select the [Status/Job Cancel] key.
2
Disconnection of communication.
1 [FAX] > [OK] key
2 Check the status of communication.
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.